Site Converter Series by ICT Power

site converter series ict

High Current DC to DC Isolated Converters for 12 and 24 Volt DC Site Equipment

The ICT Site Converter Series is a high current, high efficiency rack mount DC to DC converter designed for dual-voltage site applications where a 24 or 48 volt DC input needs to be converted to a 12 volt DC output to power two-way radios, repeaters, RF amplifiers, trunking systems, or other electronic equipment.

With wide-ranging input of 20 to 60VDC, the ICT Site Converter will support both 24 volt to 12 volt, or 48 volt to 12 volt applications. There are two models available to support 70 Amps or 100 Amps of peak current. Efficiency is 90%.

The fully isolated ICT Site Converter is ideal for positive or negative ground environments. Output voltage is adjustable between 12.5 and 14.5VDC using a front-mounted trim pot.

When DC fails or the converter shuts down a remote alarm contact activates.  The converter can be shut down remotely for servicing or to conserve battery when not in use.

Feature Highlights

  • 90% conversion efficiency
  • Low output ripple
  • –30 to +60 °C operating temperature range
  • Fully isolated design for positive or negative ground installations
  • 2RU 19 inch rack mount chassis with adjustable mounting position
  • Adjustable output voltage trim
  • Front panel power switch
  • Remote alarm and remote shutdown contacts
  • 2 year warranty

Standard Features of the Site Converter Series

  • Performance and Flexibility
    • The Site Converter is based on the ICT high efficiency switch-mode design that converts more available power while reducing waste energy, lowering heat build up and power draw on the battery.  Input voltage ranges from 20-60 volt DC,  with both 24 or 48 volt DC inputs to provide clean, efficient 12 or 24 volt DC power output.
      The output voltage can be adjusted to allow for line drop, or for loads that have a very specific input voltage requirement. The remote alarm terminals will send a signal in the event of a failure.
  • Reliability
    • Careful design that virtually eliminates internal wiring and connections that can fail. Wide input voltage ranges are less susceptible to voltage spikes and drops. ICT perfoms a test to each unit before leaving the factory.
      ICT DC-DC Converters have a proven track record of reliability over years of field service. Two year warranty.
  • Energy Saving Design
    • The Site Converter Series are highly energy-efficient  in the conversion process.  Typical efficiency for the ICT Site Converter is 90%, extremely high for this category of converters. The unit comes with a contact terminal to turn the converter on and off by the main circuit; it also saves energy and avoids standby drain on the battery.


Model Number Input Voltage Range Output Voltage Output Current  (Cont.) Output Current (Peak) Operating Temperature Range***
ICT206012-70AI2 20-60 VDC 12.5-14.5 VDC* +/- 300 mV 64 Amps 70 Amps -30°C to +60°C
ICT206012-100AI2 20-60 VDC 12.5-14.5 VDC* +/- 300 mV 96 Amps 105 Amps -30°C to +60°C
ICT206024-35AI2 20-60 VDC 25.0-29.0 VDC** +/- 600 mV 32 Amps 35 Amps -30°C to +60°C
ICT206024-50AI2 20-60 VDC 25.0-29.0 VDC** +/- 600 mV 48 Amps 52 Amps -30°C to +60°C
*Factory set to 13.8VDC. **Factory set to 27.6VDC. Adjustment requires use of an external volt meter to measure the voltage at the output terminals. ***Derate 2%/ C > 40 C.

Request Information

Contact us to request Product Information, Place Orders or Ask Questions.

Sales Team


Order Support


Sales Team


Order Support


Purchase Order Fax


Search All Products