MENU
 

Freedom HF Inverter Charger by Xantrex

freedom hf inverter xantrex

Compact, light & affordable Inverter

12 VDC, 1000W/20A, 1000W/55A, 1800W/40A – 120 Vac / 60 Hz

The Freedom HF Inverter Charger is one of the smallest, lightest, and most affordable inverter/chargers in the market today. It features modified sine wave output and it is available in three models: 1000 watts with a 20-amp charger, 1000 watts with a 55-amp charger and 1800 watts with a 40-amp charger

Freedom HF is equipped with quick-connect AC terminals and ignition lockout capability. The quick-connect AC terminal on both AC input and output enables incredibly installation eliminating the need for strain relief clamps. The ignition lockout feature helps to minimize battery drain by disabling the inverter when the ignition is turned off.

The new generation Xantrex Freedom HF inverter/charger is ideal demanding marine and RV conditions. The temperature-controlled multistage charging feature ensures a safe and efficient battery recharge. Both models include an automatic transfer switch and a detachable digital remote control panel display that provides precise system information.

Freedom HF meets KKK-A-1822 standard for use in EMS applications.

Models Part number Input voltage AC output
Freedom HF 1000 806-1020 12V GFCI and/or Hardwire
Freedom HF 1055 806-1055 12V GFCI and/or Hardwire
Freedom HF 1800 806-1840 12V GFCI and/or Hardwire
Freedom HF 1055-EMS 806-1055-02 12V GFCI and/or Hardwire
Freedom HF 1800-EMS 806-1840-02 12V GFCI and/or Hardwire
Accessories Part number
Remote Control Panel (no cable) 808-1840
Remote cable, tel-type 6-cndct 25ft 31-6257-00
Remote cable, tel-type 6-cndct 50ft 31-6262-00

Standard Features of the Xantrex Freedom HF Inverter:

  • The quick-connect AC terminals on both AC input and output enables incredibly easy installation
  • Designed to power demanding loads such as microwave ovens, TVs, DVD players, small appliances and other electronic equipment
  • Multistage charging helps ensure that batteries are recharged quickly and efficiently
  • Ignition lockout feature helps to minimize battery drain
  • Detachable digital remote control panel display provides system information. (Cable included)
  • Automatic three-stage battery charger
  • Designed to be hardwired using quick-connect AC terminals or by connecting AC through GFCI receptacles (included)
  • Built-in 30-amp relay to automatically transfer between inverter power and incoming AC utility power
  • No Messy Wiring. Quick Installation. Minimal Battery Drain.
  • Two year warranty

Protection Features:

  • Battery over-voltage and under-voltage protection
  • Over-temperature shutdown
  • Automatic overload protection
  • Short-circuit protection
  • Ground-fault protection
  • ETL certified to UL458 for use in mobile RV, marine and commercial applications

Applications

  • Recreational vehicles
  • Marine
  • Heavy duty trucks
  • Work vehicles
  • Buses / coaches
  • Emergency & Specialty vehicles – EMS

FREEDOM HF BY XANTREX

Electrical specifications -Inverter
  HF 1000 HF 1055 HF1800
Output power (continuous) 1000 W 1000 W 1800 W
Surge power 2000 W 2000 W 3600 W
Output frequency regulation 60 Hz 60 Hz 60 Hz
Inverter voltage regulation 115 +/-10 Vrms 115 +/-10 Vrms 115 +/-10 Vrms
Output wave form Modified sine wave Modified sine wave Modified sine wave
Efficiency (full load) > 80% > 80% > 80%
Peak efficiency > 87% > 87% > 87%
No-load input power (producing output voltage) < 10 W < 10 W < 10 W
Off mode current draw (display off) < 1 mA < 1 mA < 1 mA
  Electrical specifications – Charger
   HF 1000  HF 1055  HF1800
Charge rate 20 A 55A 40 A
AC input voltage range 90 – 130 Vac 90 – 130 Vac 90 – 130 Vac
AC transfer relay 30 A 30 A 30 A
Battery voltage (nominal) 12 Vdc 12 Vdc 12 Vdc
Operating voltage range 10.5 – 15.5 Vdc 10.5 – 15.5 Vdc 10.5 – 15.5 Vdc
Low battery cut-out (low limit / high limit) 10.5 Vdc / 11.8 Vdc 10.5 Vdc / 11.8 Vdc 10.5 Vdc / 11.8 Vdc
AC input (max. charge) 5 Aac 10 Aac 7.5 Aac
Default bulk charge voltage setting 14.2 Vdc 14.2 Vdc 14.2 Vdc
Default float charge voltage setting 13.5 Vdc 13.5 Vdc 13.5 Vdc
Battery charge outputs One One One
Charge control Three-stage Three-stage Three-stage
Battery type settings Flooded / Gel / AGM / Fixed 13.5 Vdc Flooded / Gel / AGM / Fixed 13.5 Vdc

Flooded / Gel / AGM /

Fixed 13.5 Vdc
Equalization No No No
Internal temperature-sensitive charging Yes Yes Yes
  General specifications
   HF 1000  HF 1055  HF 1800
Optimal operating temperature range 32°F to 104°F (0°C to 40°C) 32°F to 104°F (0°C to 40°C) 32°F to 104°F (0°C to 40°C)
Optional remotes Detachable display Detachable display Detachable display
Unit weight 10 lb (4.5 kg) 10 lb (4.5 kg) 12.8 lb (5.8 kg)
Unit dimensions (HxWxL)   4.2 x 9.5 x 15.5“ (106 x 241 x 393 mm) 4.2 x 9.5 x 15.5“ (106 x 241 x 393 mm) 4.2 x 9.5 x 18.0“ (106 x 241 x 393 mm)
Warranty Two year Two year Two year
 

Request Information

Contact us to request Product Information, Place Orders or Ask Questions.

Sales Team

     

Order Support

     

Sales Team

      800.931.4919

Order Support

      800.428.7697

Purchase Order Fax

      800.931.4817

Search All Products