MENU
 

AT10 Battery Charger by HindlePower

at10 battery charger-hindlepower

Single Phase Battery Charger 

The AT10 Battery Charger by HindlePower is the world’s easiest to operate float battery charger.  It not only has over 20 years of proven reliability but it also has become the industry’s “gold standard” for all stationary battery charging utility applications. It also includes a 5 year standard warranty.

Combining the performance and accuracy of a microprocessor with the reliability of SCR power conversion technology, makes the AT10 HindlePower Series the standard in stationary battery chargers.

In addition, AT10.1’s are easy to install, operate and maintain and they are also packed with the most standard features and best warranty in the industry.

Applications

The AT10 Battery Chargers are frequently used in applications such as:

  • Utility & Communications: Power generation, Substations, Microwave relay sites and Switchgear
  • Manufacturing: Emergency DC Power, DC Operated Breakers and Alarm Systems
  • Commercial: Alarm Systems, Uninterrupted Power Systems and also DC Control Systems
  • Transportation: Signal Systems, Switchgear, Alarm Systems

Standard Features of the AT10 Battery Charger

  • 5 Year Product Warranty
  • Universal main control board operates in any AT Series charger
  • Alarm assembly with local LEDs and summary relay contact for AC Failure, DC Failure, High Vdc, Low Vdc, Positive(+) and Negative(-) ground fault
  • High DC voltage shutdown
  • Forced load share during parallel operation
  • Float/equalize selector switch with indicating lights
  • Manual equalize timer (0-255 hr.) with indicating lights
  • AC line failure automatic equalize timer (0-255 hr.) with indicating light
  • AC On indicating light
  • 1% Digital LED meter for Vdc, Adc, timer hours as well as alarm settings
  • AC input and DC output circuit breakers
  • Membrane front panel
  • A redundant analog circuit for LDCV alarm, independent of the microprocessor
  • Redundant control loops for higher reliability
  • Local or remote voltage sense with redundancy to protect against remote sense failure
  • Self-diagnostics
  • Input & output MOV surge suppressors
  • Reverse polarity protection via free wheeling diodes
  • CU-AL I/O compression lugs
  • Switchboard wire, UL VW-1 closure pre-treated using a 5-stage iron phosphate process with baked epoxy powder coating in ANSI 61 gray

Safety and Acceptance

  • Meets NEMA PE 5-1996, PE  5-1997 (R2003) specification
  • NEMA-1/IP20 type standard  enclosure
  • Third party agency approvals CSA FCC CE

AT10 Battery Charger by HindlePower

AC OUTPUT
Group 1 (6-25 Adc) Voltage 120/208/240Vac (multi-tap) 60Hz 480Vac 60Hz 220Vac, 380/416Vac 50/60Hz 550-600 Vac 60Hz
Group 2 (30-100 Adc) Voltage

120, 208, 240 or 480Vac 60Hz

220Vac, 380 or 416Vac 50/60Hz

550-600 Vac 60Hz

Input Voltage Tolerance +10%, -12%
Input Frequency Tolerance ±5%
Efficiency 85-90% typical for 130Vdc at 50-100% load
DC Output
Voltage Ratings 12, 24, 48, or 130Vdc nominal
Current Ratings GROUP 1: 6, 12, 16, 20, 25Adc
  GROUP 2: 30, 40, 50, 75, 100Adc
Continuous Rating 110% rated current at maximum equalize voltage at 50ºC
Current Limit Adjustment Range 50% to 110% rated output
Voltage Regulation

±0.25% for line, load and temp. variations

*Regulation at max. equalize voltages may not meet ±0.25%

Electrical Noise 32dBrnc
Ripple:

12/24/48Vdc

  • Unfiltered on battery 1% Vrms
  • Filtered on battery 30mVrms
  • Filtered off battery 1% Vrms
  • Battery Eliminator 30mVrms
130Vdc
  • Unfiltered on battery 2% Vrms
  • Filtered on battery 100mVrms
  • Filtered off battery 2% Vrms
  • Battery Eliminator 100mVrms
Surge Withstand Capability Meets IEEE-472, ANSI C37.90a
SPECIFICATION CHART:
DC Output Rating DC Circuit Breaker Rating Approx. Shipping Weights lbs.(kg)
Volts Amps
12Vdc GROUP 1 6 10 83 (38)
12 20 87 (40)
16 25 92 (42)
20 30 118 (54)
25 40 100 (46)
12Vdc GROUP 2 30 50 184 (84)
40 60 189 (86)
50 80 194 (88)
75 100 199 (91)
100 150 225 (103)
24Vdc GROUP 1 6 10 99 (45)
12 20 109 (50)
16 25 115 (53)
20 30 119 (54)
25 40 136 (62)
24Vdc GROUP 2 30 50 259 (118)
40 60 267 (122)
50 80 342 (156)
75 100 355 (162)
100 150 360 (164)
48Vdc GROUP 1 6 10 105 (48)
12 20 120 (55)
16 25 155 (71)
20 30 170 (78)
25 40 180 (82)
48Vdc GROUP 2 30 50 217 (99)
40 60 225 (103)
50 80 250 (114)
75 100 433 (197)
100 150 450 (205)
130Vdc GROUP 1 6 10 130 (59)
12 20 155 (71)
16 25 215 (98)
20 30 225 (103)
25 40 265 (120)
130Vdc GROUP 2 30 50 285 (130)
40 60 340 (155)
50 80 375 (171)
75 100 482 (219)

Request Information

Contact us to request Product Information, Place Orders or Ask Questions.

Sales Team

     

Order Support

     

Sales Team

      800.931.4919

Order Support

      800.428.7697

Purchase Order Fax

      800.931.4817

Search All Products