IBC320 Battery Charger Series and the IBC320MW by Analytic Systems are fully digital signal processor controlled and feature universal input voltage from 85 to 265 VAC at 50 or 60 Hz with active power factor correction for the most efficient use of AC power.
Four charging profiles are available with easy front panel selection to handle most types of batteries from traditional Lead Acid, Sealed Lead Acid and even Lithium Ion.
The free to download ‘Power Wizard’ software allows full programming and selection of each of the four profiles from a laptop computer. 300 and 1000 Watt models for 1 or 2 banks of 12, 24, 28, 32, 36 or 48 Volt batteries.
IBC320MW model available with MIL connectors, extra input and output filtering and sealed to IP66.
|Volts||85 - 265 VAC, 1 Phase, 45 - 65 Hz|
|Current (max)||* 4 Amps with inrush protection|
|Input Fuse||AGC 5 Amp|
|Power Factor||>0.99 at full load|
|Efficiency||>90% at full load|
|* Maximum Input Current Specified at 105 VAC, output power derated below 105 VAC|
|Nominal Voltage||12 VDC||24 VDC||28 VDC||32 VDC||36 VDC||48 VDC|
|Voltage Range **||12.0-15.5 VDC||24.0-31.0 VDC||28.0-36.2 VDC||32.0-41.3 VDC||36.0-46.5 VDC||48.0-62.0 VDC|
|Output Current||20 Amps||10 Amps||9 Amps||8 Amps||7 Amps||5 Amps|
|Recommended Battery Amp-Hours||100||50||45||40||33||25|
|Standard Temp Compensation||-15 mV/C||-30 mV/C||-35 mV/C||-40 mV/C||-45 mV/C||-60 mV/C|
|Battery Banks||1 or 2 Banks with common negative|
|Charging Stages||2 or 3 stage user selectable|
|End of Charge||Float or Rest user selectable|