MENU
 

Freedom SW Inverter by Xantrex

freedom sw inverter charger xantrex

High surge, full featured Inverter Charger

12V & 24V, 2000W & 3000W – 120 Vac / 60 Hz

Xantrex Freedom SW Inverter Charger Series are the most advanced and capable inverter/chargers in the mobile market. Available in 3000 W with 80 A charger and 2000 W with 55 A charger or 100 A charger. These units are packed with features like “Generator Support Mode” which enables the Freedom SW to assist a generator when AC loads exceed the generator’s capacity.

They are also stackable for extra power and with the ComBox accessory, data logs and system control can be pushed to your tablet or phone.

Model Selection Guide

Models Part number Input voltage AC output
Freedom SW 2012 815-2012 12V GFCI and/or Hardwire
Freedom SW 3012 815-3012 12V GFCI and/or Hardwire
Freedom SW 2024 815-2024 24V Hardwire
Freedom SW 3024 815-3024 24V Hardwire
Accessories Part number
System Control Panel 809-0921
Automatic Generator Start 809-0915
Conext Combox Communication Box 809-0918
GFCI Option 808-9003
Remote Panel 808-9002
75′ Network Cable 809-0942
25′ Network Cable 809-0940
Cable for Series Stacking 808-9005
Sequence Power Manager 809-0913
Freedom SW telephone to network cable adapter 808-9010

Standard Features of the Xantrex Freedom SW Inverter Charger

  • Parallel stacking capability to double the inverter power output
  • Series stacking capability enables operation of 240 Vac appliances
  • Advanced configuration options for customized applications*
  • Built-in transfer switch automatically transfers between inverter power and incoming AC power
  • True sine wave output to operate sensitive electronics
  • Power factor corrected multi-stage charger for fast, efficient charging
  • Temperature compensated charging for all climate conditions
  • Ignition lockout feature helps minimize unnecessary battery drain**
  • Full inverter output up to 40°C (104°F) for 3000W model; 30°C (86°F) for 2000W model
  • Conformal coated circuit boards to protect against humid environments
  • Dual input / Dual output AC interface (3000 W model only)
  • Compatible with the Xantrex Automatic Generator Start*** (Part#809-0915)
  • Meets CSA, UL458 (with marine supplement), ABYC and FCC Part 15, Class B requirements
  • Two year limited warranty

*A System Control Panel is required for all system configuration and setup
**When used with the remote panel
***Sold separately

Protection Features

  • Battery over-voltage and under-voltage protection
  • Over-temperature shutdown
  • Automatic overload protection
  • Short-circuit protection
  • Integrated, resettable AC breakers
  • Meets CSA, UL458 (with marine supplement), ABYC and FCC Part 15, Class B requirements

Applications

  • Recreational vehicles
  • Marine
  • Heavy duty trucks
  • Work vehicles
  • Buses / coaches
  • Specialty vehicles

FREEDOM SW

-12 VDC
ELECTRICAL SPECIFICATIONS - INVERTER
Freedom SW 2012 Freedom SW 3012
Output power (continuous at 40°C) 2000 W 3000 W
Surge rating (5 seconds) 4000 W 6000 W
Peak output current 55 A 80 A
Output frequency 60 Hz +/- 0.2 Hz 60 Hz +/- 0.2 Hz
Output voltage 120 Vac
Output wave form True sine wave
Optimal efficiency 90%
No-load power draw (inverting) 3 Adc
Input DC voltage range 10 - 16 Vdc
AC connections Single phase in/out Split phase in / dual out, Dual in / dual out
 
ELECTRICAL SPECIFICATIONS- CHARGER
Freedom SW 2012 Freedom SW 3012
Output power (continuous at 25°C) 100 A 150 A
Output voltage 12 Vdc 12 Vdc
Output voltage range 5-16 Vdc
Charge control 3 stage with manual equalize
Charge temperature compensation Remote battery sensor (included)
Optimal Efficiency > 85%
AC input power factor (maximum charge) 0.98 typical
Input current (for maximum charging) 16 Arms nominal 24 Arms nominal
Input AC voltage 120 Vac
Input AC voltage range 85 - 140 Vac
Dead battery charge > 5 Vdc
 
GENERAL SPECIFICATIONS
Freedom SW 2012 Freedom SW 3012
Compatible battery types Flooded / gel / AGM*
Transfer relay rating 1 leg of 30 A 2 legs at 30 A each
Transfer time (AC to inverter and inverter to AC) < 20 ms
Optimal operating temperature range - 4°F to 140°F (- 20°C to 60°C)
Storage ambient temperature range - 40°F to 185°F (- 40°C to 85°C)
Unit dimensions (H x W x L) 7.75 x 13.5 x 15.25” (197 x 343 x 387 mm)
Unit weight 27.5 kg (60.5 lbs) 33.5 kg (73.7 lbs)
Warranty 2 years
Master carton quantity 1
Master carton dimensions (HxWxL) 11.8 x 17.1 x 20.5” (300 x 435 x 522 mm)
Master carton weight 30 kg (66 lbs) 35 kg (77 lbs)
Part Number 815-2012 815-3012
REGULATORY AND ENVIRONMENTAL COMPLIANCE
ETL certified to CSA 107.1, UL458 with marine supplement**, FCC Part 15, Class B

-24 VDC

ELECTRICAL SPECIFICATIONS - INVERTER
 Freedom SW 2024 Freedom SW 3024
Output power (continuous at 40°C) 2000 W 3000 W
Surge rating (5 seconds) 4000 W 6000 W
Peak output current 55 A 80 A
Output frequency 60 Hz +/- 0.2 Hz
Output voltage 120 Vac
Output wave form Pure sine wave
Optimal efficiency 94%
No-load power draw (inverting) <1.5 Adc
Input DC voltage range 20 - 32 Vdc
AC connections Single phase in/out Split phase in / dual out
ELECTRICAL SPECIFICATIONS - CHARGER
Freedom SW 2024 Freedom SW 3024
Output current (continuous at 25°C) 50 A 75 A
Output voltage 24 Vdc 24 Vdc
Output voltage range 12 - 32 Vdc
Charge control 3 stage with manual equalize
Charge temperature compensation Remote battery sensor (included)
Efficiency > 85%
AC input power factor (maximum charge) 0.98 typical 0.95 typical
Input current (for maximum charging) 15.8 Arms nominal 22 Arms nominal
Input AC voltage 120 Vac
Input AC voltage range 85 - 140 Vac
Dead battery charge > 12 Vdc
GENERAL SPECIFICATIONS
Freedom SW 2024 Freedom SW 3024
Compatible battery types Flooded / gel / AGM*
Transfer relay rating 1 leg of 30 A 2 legs at 30 A each
Transfer time (AC to inverter and inverter to AC) < 20 ms
Operating temperature range (full power) -4°F to 86°F (-20°C to 30°C) -40°F to 104°F (-20°C to 40°C)
Storage ambient temperature range -67°F to 167°F (-55°C to 75°C) -40°F to 185°F (-40°C to 85°C)
Unit dimensions (HxWxL) 7.75 x 13.5 x 15.25” (197 x 343 x 387 mm)
Unit weight 27.5 kg (60.5 lbs) 31.5 kg (69.4 lbs)
Warranty 2 years
Master carton quantity 1
Master carton dimensions (HxW xL) 11.8 x 17.1 x 20.5” (300 x 435 x 522 mm)
Master carton weight 30 kg (66 lbs) 35 kg (77 lbs)
Part Number 815-2024 815-3024

Request Information

Contact us to request Product Information, Place Orders or Ask Questions.

Sales Team

     

Order Support

     

Sales Team

      800.931.4919

Order Support

      800.428.7697

Purchase Order Fax

      800.931.4817

Search All Products