Telecom Rackmount DC-DC Converters accept a wide input range at 24 or 48 VDC nominal, and produce pure 12, 24 or 48 VDC power. Telecom Rackmount DC-DC Converters are an ideal solution for colocation power source voltage and ground reference differences between Telecom, Microwave, and Wireless Cellular equipment. 100 % input/output isolation eliminates positive ground/ negative ground compatibility problems.

These units meet strict telecom requirements: low noise, high efficiency, reliability and regulation; 200% intermittant operation. With a 2 RU chassis, Telecom Rackmount DC-DC Converters conserve precious rack space.

Output voltage is well filtered and maintained within 1% for all line and load conditions, allowing use with sensitive transceivers and telecom equipment. The case is designed for convection cooling - no fan maintenance required - and features front panel metering and voltage adjustment.

• Input circuit breaker.
• Output fuse.
• Current limited/short circuit proof.
• High/low input voltage shutdown
• Fail-safe components guard against output over-voltage condition.
• Automatic high temperature power reduction starting at 65° C heat sink temp.
• Automatic thermal shut down and recovery @ 85° C heat sink temp. (automatic reset).
• Reverse polarity protection.

• Anodized aluminum front panel, vinyl coated aluminum case.
• Mounting brackets provided for 19" or 23" rackmount, flush or 6" forward mount.
• Easy access input/output terminal block on back of unit, with protective cover.
• Front panel switch guard provided.
• Output voltage adjustment potentiometer recessed in front panel.

• Operation as battery charger and / or parallel redundant operation. (Heat sink mounted oring diode installed in series with the output)
• Output Failure Alarm Contacts
• Case Size: 3.5 x 19/23 x 14"